EFP camera fiber optic connection system consists of camera fiber optic adapter (TX) and fiber optic base
station (RX) , custom-designed for long-distance transmission of
EFP live production system, to achieve Forwarding SD / HD / 3G-SDI
video, reverse video (SDI digital or analog composite CVBS signal),
TALLY , Intercom, Remote control, GEN-lOCK, Ethernet signals 10KM
transmission over an optical
Power supply in two ways:
1, the battery power supply, the camera fiber optic adapter (TX)
hanging on the camcorder via the front A or V-shaped gusset plate ,
the back hanging battery while power supply to the camera and fiber
optic adapter;
2, Opto-electronic hybrid cable remote power supply , fiber optic
adapters camera hanging on the front of the camera via the A or
V-shaped gusset plate, and then power supply the camera and fiber
optic adapter via the opto-electric hybrid cable . Opto-electric
hybrid interface could be Lemo,Neutrik, MX / LC / FC / ST / SC,
etc., using simple and reliable self-locking structure, safe and
stable connection
Features:
easily pass the Pathological test(extremely harsh environments)
SD, HD, 3G automatic input detection, support 270Mbit / s -
1.48Gbit / s - 3Gbit / s rate, support SMPTE-424M 3Gbps HD-SDI,
SMPTE-292M HD-SDI, SMPTE-259M SDI serial digital video signals and
DVB-ASI signals
Uncompressed lossless transmission without delay;
More than 10KM transmission distance up to a maximum 80KM; when the
opto-electric hybrid cable power supply the distance up to 250
meters.
Aluminum precision manufacturing, the size is about the BP battery
size, lightweight and convenient, A-type or V-shaped with a
flexible pinch;
Supports Sony / Panasonic / JVC, etc. Remote control
Mic level input (with mute function) and amp functions (volume
adjustment)
Tally / GPI output or charged dry output
Wide temperature range, low power consumption
Application:
Television studio, mobile studio
EFP Electronic Field Production, major sporting events and large
celebrations broadcast live
ENG camera (outdoor photo camcorders) upgraded to a EFP camera.
A type hanging plate for camera fiber optic adaptor:
V type hanging plate for camera fiber optic adaptor:
| Product Name | EFP/ENG camera fiber optic connection system |
| Product Model | JM-EFP-G3 |
| SDI Connector | BNC |
| Optical Fiber | Dual LC fibers, and LEMO EDW Compatible with multimode or single
mode fiber |
| Power Supply | AC85-260V/50Hz or DC48V input(base side) /LEMO EDW(DC 12V,camera
side) |
| SDI Format | 1)All inputs and outputs are equalized and re-clocked |
| 2)Immune to pathological patterns over the entire link budget and
operating temperature range |
| 3)SMPTE 424M-2006, 292, 259 and DVB-ASI compliant |
| 4)Supports embedded audio and data signals |
| 5)Support SDSDI & HDSDI & 3GSDI, Support 270M & 1.485G & 2.97G SDI
Video |
| Dimension | TX: V-Lock on camera end, RX: 19" 1U rack mount on base end |
| Working Environment | Working Temperature: 0 ℃~+85 ℃; Relative Humidity: 0 ~ 95% (no cold
condensation) |
| Warranty | 2 Years warranty |
| Product description | Compliance: 3G, HD, SD compliance, SMPTE 424M, SMPTE 292M, SMPTE
259M |
| 1 x 3G-HDSDI, forward direction (from tx) |
| 1 x 3G-HDSDI, Reverse direction |
| 1x intercom( microphone audio and headphone in(from TX) |
| 1x balanced audio in(from RX) |
| 1 x RS422 data, full-duplex mode |
| 1 x RS232 bi-directional |
| 1 x Tally |
| Rx Dimension: 480 x 250 x 50 (mm) = 19' standard case |
| Grosse weight is about 8.5kg, |
| Extends distance: Single mode 10km / Multi mode 300 meters |
| Packing in box: Transmitter x1, Receiver x 1, Power wire x 1, Use
mannual x 1 |
Connection:
| Transmitter ( Camera fiber adaptor) | Receiver ( Base end ) |
| Shape: V-lock | Shape: 1U Rack mount |
| Video: 1x 3G-HDSDI input, 1x 3G-HDSDI output, BNC connector | Video: 1x 3G-HDSDI input, 1x 3G-HDSDI output, BNC connector |
| Intercom: 1x 5 Pin XLR, Female,Mic level audio | Intercom: 1x5 Pin XLR, Female, line level audio, |
| Tally: 1x 4 Pin Aviation Connector, Dry contact closure, | Tally: 1x DB9 Connector, Dry contact closure, |
| Remote:1x8Pin Aviation Connector,1x Bidi RS232,1x RS422 | Remote: 2xDB9 Connector,Male,1xBidi RS232,RS422 |
| Vol Control: Mute,I+,I-, | |
| 1x DC/DC voltage regulator inside the camera end, | |
| Fiber : 2x LC( And make space for LEMO EDW ) | Fiber : 2x LC( And make space for LEMO EDW ) |
| Power supply: from the LEMO EDW,after DC-DC,12V | Power supply for base end: 1x AC 90-240V, |
| Power supply for LEMO: 1x DC 48V input ( 4 Pin XLR, Male ), |
| 1x Power switch, | 1x AC 90-240 input with Power switch, |
| LED indicator: Mic, Fiber, SDI in, SDI out, PWR | LED indicator: Fiber, SDI in, SDI out, PWR |
